DDM6 Mobile Fuel Polisher

IPU Diesel Defence DDM6 mobile fuel polisher

IPU Diesel Defence DDM6 mobile fuel polisher

The DDM6 Mobile Fuel Polisher is a powerful high flow fuel filtration and polishing module utilizing a two-stage filtration principle, which ensures that solid contamination, microbial activity and water ingress can all be effectively removed in a single pass.

  • Flow rates up to 500 l/min.
  • Filtasorb2 water removal media able to remove 100% free water and 99% entrained water from diesel fuel.
  • System rated at 10 bar working pressure with safety shut-off at 3.5 bar.
  • Optional secondary outlets allow the filters to be bypassed.
  • Leakage or Spillage alert with float switch located in drip tray.

DDM6 Mobile Fuel Polisher Features & Benefits

 

Faster solution, greater savings

Stored fuel can develop solid particulate, water and diesel bug contamination if left for greater than 12 months without being replaced or cleaned. The DDM6 Mobile Fuel Polisher  delivers a powerful throughput of
up to 500 l/min. The DDM6 removes both solid particulate and water in a single pass ensuring fuel is clean and dry, is within specification and ready for use when required.

 

Challenging applications demand the highest performance

For equipment working in dirty locations in large operations across the globe it is critical that your filtration system can perform in the most challenging environments. The DDM6 delivers with each housing being hydrostatically pressure tested to the European Pressure Equipment Directive, 97/23/EC.

 

Specifications

Model DDM6-4-50-FM-PB
Flow rate (l/m) 500
Indicative tank size (l) 500,000
Filtration Efficiency (max.)  99.9%
Particulate Removal (min.) (µm) 1
No. filter housings 6
Filter size & type Size 2
Control System Push-Button
Pump Type Self Priming Centrifugal
Maximum System Pressure 10 bar
Remote Emergency Stop Yes
Differential Pressure Indicator Dual Mechanical
Bund Float Switch Yes
Starter Contactor Yes
Voltage (V) 415
Frequency (Hz) 50
Current (A) 9.6
Power Consumption (kW) 4
Thermal Overload (A) Inverter set at 9.6
Noise Level (dBA @ 1m) 85
Operating Temperature (°C) 5 to 50
Environmental Protection IP66
Dimensions (mm) 1750 (h) x 2270 (w) x 1340 (d)
Dry Weight (kg) 614
Inlet Connections 1.5″ CAMLOCK M
Outlet Connections 1.5″ CAMLOCK M
Pipework Mapress
BMS System No

 

Related Products