The DDF1 Fuel System is a compact wall mounted unit with dual particulate and water removal and flow rates of up to 90 l/min.Find out more
The DDM5 Fuel Polishing System is a powerful high flow fuel filtration and polishing module utilizing a two-stage filtration principle, which ensures that solid contamination, microbial activity and water ingress can all be effectively removed in a single pass.
Stored fuel can develop solid particulate, water and diesel bug contamination if left for greater than 12 months without being replaced or cleaned. The DDM5 delivers a powerful throughput of up to 250 l/min. The DDM5 removes both solid particulate and water in a single pass ensuring fuel is clean and dry, is within specification and ready for use when required.
For equipment working in dirty locations in large operations across the globe it is critical that your filtration system can perform in the most challenging environments. The DDM5 delivers with each housing being hydrostatically pressure tested to the European Pressure Equipment Directive, 97/23/EC.
|Dimensions||1160mm (W) 1600 (D) 1747 (H)|
|Flow Rate||250 l/min|
|Frame||French blue powder coat with fork lift channels, integral drip tray|
|Pipework||Crimped throughout rated to 16 bar|
|Control Panel||Mild Steel Cabinet, full CE compliance|
|Voltage||415 VAC, 3pH|
|Safety Features||Remote E-stop, Drip tray float switch, high pressure shut-off switch set to 3.5 bar|
|Pump||2.1 kW self-priming centrifugal pump|
|Filter housing construction||Four Size 2 Filter Housings , Stainless Steel 304, connected in series flow path, drain ports on base, bleed points on domed lid. CE Marked. Conventional dished end to aid clean-down. Each housing hydrostatically pressure tested, European Pressure Equipment Directive, 97/23/EC. Positive seal seating mechanism. Robust support basket assembly fabricated from perforated sheet rather than wire mesh for extra strength. Internally and externally pickle-finish as standard. Bolted style closures. Rated at 10 bar liquid, 4.5 bar gas|
|Filtration Efficiency||Up to 1μm absolute depending on filter insert|
|Water Removal||Naturally coalescing – remove free water from oils and fuels, 100ppm or better using Filtasorb2 insert|
|Pressure||10 bar system, shut off set to 3.5 bar|
|Connections||Inlet: 2“ Camlock Male|
|Outlet: 2″ Camlock Male|
|Transfer: 2″ Camlock Male|
|Optional Extras||Fluid Sampling Points Flow meter PC9001 laser particle counter WMS-500 ppm water sensor; telemetry for remote access|