ASME Archives

ASME

The ASME Boiler and Pressure Vessel Code was established in 1915 in the US. The ASME Code is a standard that regulates the design and construction of boilers and pressure vessels.

Torpille

IPU were recently contracted to supply the emergency starting system on the fire pump replacement for the mature Torpille Field offshore Gabon. The starting system was designed to as an emergency back up on the CAT C15 engine. As the platform has a constant air supply, the recharging of the start accumulator is achieved with both a manual hand pump and also a pneumatically driven hydraulic pump. Boosting the air supply by a ratio of 60:1 the air driven pump uses the platform air supply to recharge the accumulators to 207bar. On reaching the system working pressure, the air driven pump stalls, only re-starting when pressure in the accumulator falls on start up of the engine, thus making an…

BMS Algeria

IPU designed and manufactured the backup hydraulic starting system for a diesel engine driven emergency fire pump. To start the 9 litre Cummins engine, the system was designed to comply with NFPA20 regulations; providing a starting capacity of six start attempts, 15 seconds each. The accumulators supplied can be recharged through both hand pump and/or a hazardous area electric motor, which automatically refills the accumulators on pressure drop during start up. The system was certified in accordance with ASME for the pressure vessels and fabricated parts. All items are suitable for use in both the harsh climate and hazardous area.

Pearl Air Starting GTL

IPU have supplied six complete air start systems for the Pearl GTL project in Qatar.

Standby Generator

Hydraulic Start Packages – FPSO The hydraulic start system was designed to provide three times 10seconds cranking capacity for the Cummins KTA50 engine on an FPSO. Full DNV classification and design approval is required for marine applications. The start system was automatically recharged by means of an electric motor driven recharge pump, which was type approved and also included a hand pump for local manual recharge. Full structural analysis for the steel work and framework was carried out to ensure it could withstand the loads of a marine environment; all none stainless steel parts were protected with a full offshore paint process. The pressure vessels were DNV and ASME compliant, as…