Engine Starting News

ATEX: Inertia vs Pre-engaged Starter Motors

May 1^st, 2015 in Engine Starting, News

When it comes to choosing a start system for diesel powered equipment, operators will often be faced with a choice between inertia and pre-engaged starter motors. If the equipment is to be used in a hazardous environment (such as a mine or offshore platform) the starter motor will require ATEX approval. In this situation a pre-engaged starter motor is the only choice. But, what is the difference between an inertia and pre-engaged starter motor? And, why do inertia starters struggle to achieve ATEX approval? Let us explain by outlining how each system works. Inertia Starting Systems Inertia starters have long been the tried and tested method of engine starting. They work by rotating the…

IPU TO EXHIBIT AT OGA 2015, MALAYSIA – 2-4 JUNE

April 17^th, 2015 in Engine Starting, News

There are just 6 weeks until the opening of OGA 2015 and IPU will be there to showcase our unique range of ATEX approved hydraulic and air start motors. These ultra-safe products are critical for hazardous environments such as offshore platforms and underground mines. Our pre-engaged hydraulic and air starters are unique. They use a cast iron construction to eliminate aluminium content. ATEX recommends against using aluminium as it is the primary fuel for a thermite reaction. They also fully engage with an engine’s ring-gear before rotating and cranking the engine, eliminating the risk of sparks caused by traditional inertia starting. During the 3 day exhibition in Kuala Lumpur…

New hydraulic system provides reliable starting for Cummins CFP9E-F30

February 23^rd, 2015 in Engine Starting, News

IPU’s Engine Starting Division have recently dispatched two new hydraulic starting systems to supply guaranteed starting to the fire pumps on a new offshore oil platform. The fire pumps are powered by Cummins CFP9E-F30 9-litre engines. The hydraulic starting systems provide a high level of efficiency enabling the Cummins cfp9e-F30 engines to start instantly, regardless of the conditions. These independent, secondary systems act as a reliable starting mechanism in case the primary electrical systems fail. Client specifications Number of starts 3 Length of starts 5 seconds cranking duration Recharge system Electric Reliability The client required a starting system which was…

IPU arrives stateside with a new office in Houston

November 14^th, 2014 in Engine Starting, News

IPU has announced the opening of a new stateside office to provide local support to the company’s growing international customer base. The US office joins IPU overseas support alongside offices in France and Malaysia plus a global network of distributors. Lawrie Freeman will lead the new Houston office. He joins the IPU family having worked in the Engine Starting industry for over 30 years. He brings an extraordinary amount of industry experience to clients in the region. IPU USA will be marking its American debut by exhibiting at the International Workboat Show in New Orleans. Lawrie will be joined by members of the Engine Starting Division to introduce the IPU range of…

Still time to book your free tickets to see IPU at the International Workboat Show

November 7^th, 2014 in Engine Starting, News

There are just a few weeks left to secure your free tickets to see IPU at the largest marine industry trade event in North America, the International Workboat Show. Our team will be welcoming delegates to view our range of non electric secondary start systems that are ideal for marine applications as well as the oil & gas and mining industries. Spring Starters – A spring starter motor from IPU is a reliable, cost effective way of providing manual starting to for diesel engines. Suitable for engines up to 12 litres, they eliminate any pollution risk, are simple to install and are ideally suited to harsh environments such as offshore and marine applications. Air Starters – IPU…

IPU to exhibit at the International Workboat Show, New Orleans – 3-5th December 2014

October 21^st, 2014 in Engine Starting, News

IPU is set to exhibit at the largest marine industry trade event in North America, The International Workboat Show. Members from IPU’s Starting Division will be presenting our comprehensive range of spring and hydraulic start motors ideal for marine applications. Spring Starters – A spring starter motor from IPU is a reliable, cost effective way of providing manual starting to for diesel engines. Available for starting engines up to 12 litres, they eliminate any pollution risk, are simple to install and are ideally suited to harsh environments such as offshore and marine applications. Hydraulic Starters – IPU Hydraulic Start Systems offer guaranteed reliability, no…

IPU Engineers complete BFPA / CETOP qualification

October 7^th, 2014 in Engine Starting, News

IPU prides itself on engineering quality and expertise. As a company we are committed to training our engineers for the benefit of our team and our customers. As part of this commitment two IPU engineers from our Starting Division have undertaking their BFPA/CETOP Level 1 Hydraulics Competence qualifications. James Hughes and Paul Smith completed the 3 day Stage 1 Hydraulics Course at the National Fluid Power Centre (NFPC) in Worksop. The course is designed to teach engineers who work in the maintenance and management of fluid power systems (both industrial and mobile) the fundamental principles that underpin all hydraulic systems. Including: An ability to read and interpret hydraulic…

Offshore servicing from IPU and SCI's Exceed service

IPU and SCI set new benchmark in offshore servicing

June 12^th, 2014 in Engine Starting, News

SCI and IPU’s new partnership raises the standard for offshore servicing of black-start engine starting systems. Survival Craft Inspectorate (SCI) has supplied, inspected and maintained marine safety equipment to the oil and gas industry for over 20 years. In partnership with IPU, a leading manufacturer of engine starting solutions for critical applications, SCI is extending its offshore servicing capabilities to starting systems and introducing a new approach to servicing and preventative maintenance – Exceed. The new benchmark for offshore servicing: Exceed Exceed offshore servicing for starting systems covers the black-start systems that ensure fire pumps, gensets and winches…

Constant Improvement in IPU Engine Starting

January 25^th, 2014 in Engine Starting

To better support ever increasing customer expectations and to bring further efficiencies to the design and manufacturing processes IPU Group has introduced the latest CAD software together with CFD and FEA capability, which will ensure IPU Group’s leadership position is maintained and strengthened. Working closely with both the IPU Group customers and the supply chain, the starting division embraces continuous improvements in the design and manufacturing environment. Jonathan Nowill, Group Engineering Director has been in charge and overseen many of the new developments at IPU Group. Having spent over 20 years in the Auto industry, Jonathan has found working at IPU Group like a breath of…

IPU Group Hosts Starting Training

January 3^rd, 2014 in Engine Starting

IPU Engine Starting division runs training event for Southern Refinery Company