Products for Power Generation

  • Protect your engine from contaminated diesel and extend the life of your equipment. Reduce call-outs, warranty claims and lower disposal costs. This on-vehicle diesel fuel filter system is available in three flow rate sizes. How good is the quality of the fuel being used in your equipment? If you are hiring out generators,…

    Find out more
    IPU Fuel Purifiner
  • Even with good fuel housekeeping procedures, water and particle contamination can get into storage tanks through the atmosphere. Night-to-day temperature changes cause tanks to slowly inhale and exhale. As biodiesel is hygroscopic it absorbs water from any new air it comes into contact with. The inhale-exhale process also…

    Find out more
    IPU Vent TRAP tank breather
  • Diesel testing is the essential and economical first step to reliable power systems. Any building, site or facility that uses generators to provide critical power needs to test its fuel regularly. A generator is only as good as the fuel that feeds it. Pages 4-13 of our Fuel Housekeeping Handbook offer an explanation as to why…

    Find out more
    Diesel Testing - DieselCheck
  • Tank cleaning is your first step to removing the problem of fuel contamination. The ClearTank diesel fuel tank cleaning service: removes water down to 200 parts per million or less as specified in EN590. disposes of solid particulates such as soot, rust and colloid carbon. removes microbial growth (aka the diesel bug). breaks…

    Find out more
    Fuel Cleaning
  • IPU’s OilLife bypass oil filter helps extend oil life. Formerly known as EOLS (Extended Oil Life System), OilLife is a kidney loop filtration system that enhances engine lubrication beyond the capabilities of traditional oil filters. Working in parallel with standard oil filtration, the system uses both filtration and…

    Find out more
    Extend OilLife Filtration System
  • IPU’s OilAlert oil quality sensors provide real-time oil condition monitoring in vehicles, ships, gensets, turbines and many other types of mechanical devices. Unlike off-site lubricant testing, OilAlert sensors constantly monitor the condition of your engine oil, transmission oils and hydraulic fluids. If a machine is…

    Find out more
    Oil quality sensors
  • Fuel polishing systems are vital for diesel-powered emergency systems. They remove a critical point of failure: fuel contamination. Modern engines and fuel systems need clean fuel to run reliably. If left untreated diesel is under constant attack from water, microbial growth and solid particulates, even after cleaning. There…

    Find out more
    Diesel Defence DD50 fuel polishing unit
  • IPU’s hydraulic engine starting solutions provide guaranteed reliability for diesel and gas engines up to 80 litres. This truly independent starting solution is capable of offering black-start (or dead-ship) capabilities. As a result it can be used as your primary or secondary method of starting an engine. It’s also…

    Find out more
    hydraulic engine starting
  • There have been big changes to the world of mains protections. These changes bring consistency and stability to the grid. G99 came into force on 27th April 2019. Sites will no longer be able to make new connections using the G59-3.4 standard. Sites connected after February 2018 with G59-3.4 will need to make the upgrade to G99.…

    Find out more
    comap mainspro g99 mains protection relay g59 3.3
  • IPU provides a full range of air starters including starter motors and whole systems. We even offer a full installation and commissioning service. Many clients choose pneumatic starting as it is a reliable and powerful method of starting an engine. You can even use your existing air supply to minimise costs and…

    Find out more
    air starting systems
  • IPU's range of genset controls covers a wide range of applications including marine, CHP, telecoms, single and multiple genset configurations.

    Find out more
    load bank testing