Gen-set controls

Gen-set controls

IPU stock a comprehensive range of gen-set controls suitable for simple to complex applications.

gen-set controls

IPU are the official UK distributor for ComAp and GAC products, as well as stocking Datakom products.

We’re experts when it comes to engine controls, with decades of experience working in many industries.

See our full range of gen-set controls below:

  • ComAp's InteliSysNTC Hybrid controller offers complex control of PV/Diesel hybrid applications. It allows smooth integration of renewable energy to conventional power generation from reciprocating gen-sets while maintaining high reliability, safety and efficiency of the site.

    Find out more
  • IPU's range of genset controls covers a wide range of applications including marine, CHP, telecoms, single and multiple genset configurations.

    Find out more
    load bank testing
  • The InteliMains NT BaseBox is a mains supervision controller base unit for use with detachable colour display for up to 31 gen-sets operating in parallel to mains (or isolated parallel).

    Find out more
    InteliMains NT BaseBox
  • The InteliMains NTC BaseBox is a mains supervision controller base unit with extended communications for use with detachable colour display for multiple up to 31 gen-sets operating in parallel to mains (or isolated parallel).

    Find out more
    InteliMains NTC BaseBox
  • The InteliMains 210 is the next generation of mains supervision controller. The IM210 is designed for the parallel operation of up to 31 gensets and mains. It offers remote control and monitoring with a flexible user friendly interface.

    Find out more
    intelimains 210
  • The ComAp InteliLite family of controllers are specifically designed for standby and prime power applications, where synchronisation is not required.

    Find out more
    ComAp InteliLite
  • The InteliSys Gas is an industrial grade controller for gas engine generator sets mainly used in CHP (Cogeneration) and power generation applications.

    Find out more
  • IPU's range of single genset controllers are suitable for Automatic Mains Failure (AMF) and Manual Remote Start (MRS) applications.

    Find out more
    single genset controllers
  • The ComAp InteliBifuel is a fully programmable controller designed for any single speed Bi-fuel application, with its features perfectly suitable for Oil and Gas, Mining and Rental applications.

    Find out more
  • The InteliGen 500 is the brand new paralleling genset controller from ComAp. With a 5" colour screen and large PLC, the IG500 is suitable for both SPtM and MINT applications. With a huge list of standard features, you'll never see genset controls in the same way again.

    Find out more
  • The InteliGen NTC is a high-end controller suitable for any complex single or multiple gen-sets paralleling application operating in standby or island mode.

    Find out more
  • The ComAp InteliVision 12Touch is an industrial grade panel equipped with 12.1” colour multi-touch screen. When paired with a ComAp controller, it allows the operator to visualise and control single gen-set in various applications.

    Find out more
    ComAp Intelivision 12
  • IPU carry a wide range of single or multiple genset controllers, for gensets operating in standby or parallel modes.

    Find out more
    ComAmp InteliCompact
  • InteliBifuel LITE package is a cost-effective, compact solution designed for single speed Bi-fuel applications at nominal output power up to 200 kW.

    Find out more
  • The new ComAp InteliGen 200 introduces a new era in parallel genset control. The power and reliability of InteliGen, combined with the design and flexibility of the InteliLite gives you the best paralleling controller ComAp have ever made.

    Find out more
    comap inteligen 200
  • ECON-4 is digital speed governor dedicated for speed control of gas or diesel engines.

    Find out more
    ComAp ECON-4
  • IPU carry a range of mains supervision controllers designed to be used within a wide range of applications.

    Find out more
    mains supervision controllers
  • ComAp's InteliBifuel MOBILE controller is a fully programmable solution designed for any mobile variable speed applications as mining haul trucks, fracking trucks, locomotives or marine propulsion engines.

    Find out more
  • The InteliVision 17Touch is a seventeen-inch touchscreen display unit for use with the range of ComAp gen-set and generator controllers.

    Find out more
    ComAp intelivision 17 touch display
  • ComAp's InteliSys Gas controller is a gas powered generator controller mainly used in CHP (Cogeneration) and power generation applications.

    Find out more
    Gas Genset controls
  • InteliVision 8 is a colour display unit designed as a simple, easy-to-use Plug and Play solution and delivers high visibility of all engine data, monitoring information and trend history in a bright, colourful and forward looking design.

    Find out more
    comap intelivision 8
  • The ComAp InteliSysNTC Hybrid generator controller is specifically designed to power systems that combine diesel and renewable forms of power generation.

    Find out more
  • IPU supplies an integrated range of marine genset control solutions for all on-board engines and generators using CAN-based technology.

    Find out more
    ComAp InteliSys
  • ComAp's simple bi-fuel genset controllers modify your original diesel power generation engine so that it uses natural gas as the main fuel.

    Find out more
  • The ComAp InteliNano NT controllers supports electronic engines. InteliNanoNT controllers are equipped with an intuitive graphic display and an extensive functionality.

    Find out more
    ComAp InteliNano
  • Compact controller for single genset operating in parallel to mains mode or AMF mode with no-breaks transfers.

    Find out more
    ComAp InteliCompact
  • Compact controller for gensets operating in multiple island and / or parallel to mains mode.

    Find out more
    ComAmp InteliCompact
  • Mains controller for multiple systems equipped with InteliCompact NT MINT genset controllers.

    Find out more
    ComAp MainsCompact
  • A sophisticated high-end range genset controller for single and multiple gensets operating in standby or parallel modes.

    Find out more
  • A comprehensive controller, with detachable colour display, for both single and multiple gensets operating on standby or parallel modes.

    Find out more
    InteliGen NT BaseBox
  • A premium control product, which is designed for complex generator (standby and parallel) and cogeneration (CHP) applications involving single and multiple gensets.

    Find out more
  • A premium control product, which is designed for complex generator (standby and parallel) and cogeneration (CHP) applications involving single and multiple gensets. Modular construction consisting of InteliSys NTC BaseBox and InteliVision 8 or InteliVision 5.

    Find out more
  • An easy to use mains supervision unit, which connects InteliGen NT and InteliSys NT controllers to the mains and serves as a bus-tie synchronizing controller between two groups of gensets.

    Find out more
  • The GAC GNS2000 Series is a family of highly-flexible genset controllers for standalone applications, suitable for both mechanical & electronically governed engines.

    Find out more
    GAC GNS2000
  • A comprehensive Bi Fuel (dual fuel) control solution for all diesel engines up to 6 cylinders in line.

    Find out more
  • A comprehensive Bi Fuel (dual fuel) control solution for all diesel engines with a maximum of 20 cylinders.

    Find out more
  • The GAC GNS2500 Series is a family of highly-flexible generator set controllers for AMF applications.

    Find out more
    GAC GNS2500
  • A marine certified comprehensive controller for both single and multiple gensets operating in standby or parallel modes.

    Find out more
    ComAp InteliGen
  • A marine certified expandable controller for both single and multiple gensets operating in standby or parallel modes, especially in co-generation (CHP) and other complex applications.

    Find out more
    ComAp InteliSys
  • Basic controller for automatic genset start/stop, mains failure monitoring and load transfer.

    Find out more
    Datakom DKG107
  • Automatic Mains Failure unit with genset control and protection, with single phase power measurements.

    Find out more
    Datakom DKG109
  • Basic manual and remote start controller with push button start and stop.

    Find out more
    Datakom DKG114
  • Basic manual and remote start controller with push button start and stop, J1939 CANBUS compatible.

    Find out more
    Datakom DKG114-J
  • Compact but comprehensive manual and remote start controller with push button start and stop.

    Find out more
    Datakom DKG119
  • Low cost unit designed to manually start and stop the genset using the key switch, with relay output.

    Find out more
    Datakom DKG151
  • Low cost unit designed to remotely start and stop the genset using the key switch, with relay output.

    Find out more
    Datakom DKG152
  • Low cost unit designed to manually start and stop the genset using the key switch, with solid state output.

    Find out more
    Datakom DKG153
  • The Datakom DKG154 is a low cost unit designed to remotely start and stop the genset using the key switch, with solid state output. Main features of the Datakom DKG154: Microprocessor controlled Remote controller engine starting and stopping Negative pulling semiconductor outputs Charge alternator excitation circuit High engine…

    Find out more
    Datakom DKG154
  • Manual key start unit with relay outputs and two-stage start switch.

    Find out more
    Datakom DKG155
  • Automatic Mains Failure unit with genset control and protection with single phase power measurement and programmable parameters.

    Find out more
    Datakom DKG207
  • Manual and remote start controller with push button start and stop, with configurable inputs and outputs.

    Find out more
    Datakom DKG215
  • Manual and remote start controller with push button start and stop, with synchroscope and check sync relay.

    Find out more
  • Manual and remote start controller with power measurement and configurable inputs and outputs.

    Find out more
    Datakom DKG227
  • Automatic Mains Failure unit with genset control and protection. With single phase power measurement, programmable parameters and RS-232 data output.

    Find out more
    Datakom DKG307
  • Automatic Mains Failure unit with genset control and protection. With single phase power measurement, programmable parameters, RS-232 data output and active SMS and modem call.

    Find out more
    Datakom DKG309
  • Manual and remote start controller with power measurement, configurable inputs / outputs and RS-232 data output.

    Find out more
    Datakom DKG317
  • Low cost unit designed to manually start and stop the genset using the key switch, with solid state output.

    Find out more
  • Manual and remote start controller with power measurement, configurable inputs/outputs and RS-232 data output.

    Find out more
    Datakom DKG517
  • Automatic Mains Failure unit for genset control and mains paralleling, with built in G59 protection

    Find out more
    Datakom DKG705
  • Multi Genset Paralleling Unit with J1939 Interface

    Find out more
    Datakom DKG707