The ComAp InteliCharger 60 series of generator battery chargers supports slow charging of both 12 and 24V batteries. They support a number of options so the series flexible enough for most environments.
The InteliCharger 60 can charge a wide range of battery types. As well as standard lead-acid batteries they are also compatible with:
They are designed to be permanently connected to a generator’s battery even when the generator is started due to short circuit protection. As a result, any damage caused to the battery and the charger is prevented.
The InteliCharger 60’s two-stage charging process and intelligent control system means that batteries can be left on a constant charge without a danger of damage or over-charging. It is fully protected against:
In addition, It includes a potentiometer to vary the charger’s output.
The InteliCharger 60’s innovative design means it mounts onto a DIN rail or attaches using screws or bolts and they are suitable for any location.
The two AF models in the range include a fail alarm which sends an alert signal to the generator’s control system if it detects a problem. An engineer can then perform appropriate maintenance. The fail alarm helps to avoids the disaster of an uncharged battery failing to start an emergency generator.
|ComAp InteliCharger 60 12-A||ComAp InteliCharger 60 12-AF||ComAp InteliCharger 60 24-A||ComAp InteliCharger 60 24-AF|
|Output voltage (V)||12.0||12.0||24.0||24.0|
|Output current (A)||6.0||6.0||3.0||3.0|
|Input voltage (VAC)||100 – 277||100 – 277||100 – 277||100 – 277|
|Input frequency (Hz)||47 – 63||47 – 63||47 – 63||47 – 63|
|Operating temperature (C)||-10 – +50||-10 – +50||-10 – +50||-10 – +50|
|Reverse connection protection||Yes||Yes||Yes||Yes|
|Mounting||Screw / Bolt / DIN rail||Screw / Bolt / DIN rail||Screw / Bolt / DIN rail||Screw / Bolt / DIN rail|
|Size (hwd) (mm)||116 x 77 x 42||116 x 77 x 42||116 x 77 x 42||116 x 77 x 42|